Now that the AMD Threadripper 200WX is installed we can get our RAM fitted. The RAM we are using for this build is kindly supplied by TeamGroup and features 4x8gb DDR4 3200 Excalibur Phantom Gaming modules.This high-performance quad-channel kit takes up 4 of the 8 DIMM slots on our motherboard, leaving it open for us to increase capacity to 64gb at a later date if needed. The RGB headers should look amazing on this build and we can’t wait to light it up. After the issues we had with the Wraith Ripper, Cooler Master has kindly sent over an ML360 TR4 Edition as a replacement. We were really hoping to use the Wraith Ripper for this build, its a fantastic looking piece of kit but we overlooked the RAM height and hopefully, we can feature one in a future build. A 360mm radiator should offer plenty of cooling for our CPU, its changed some aspects of our design plan but I am sure we can come up with something as an alternative. It also adds another 3 RGB 120mm fans to the build for the front panel.
Part 5 of this build log will move to the assembly and fabrication of our new basement shroud, we shared imagess of that via our Facbook Page and it was really well recieved. Stick around and see you for the next chapter.