Mod 83

Phantom Gaming Part 4

Now that the AMD Threadripper 2990WX is installed we can get our RAM fitted. The RAM we are using for this build is kindly supplied by TeamGroup and features 4x8gb DDR4 3200 Excalibur Phantom Gaming modules.

This high performance quad channel kits takes up 4 of the 8 DIMM slots on our motherboard, leaving it open for us to increase capacity to 64gb at a later date if needed. THE RGB headers should look amazing on this build and we cant wait to light it up.


After the issues we had with the Wraith Ripper, Cooler Master have kindly sent over a ML360 TR4 Edition as a replacement. We were really hoping to use the Wraith Ripper for this build, its a fantastic looking piece of kit but we overloooked the RAM height and hopefully we can feature one in a future build.


A 360mm radiator should offer plenty of cooling for our CPU, its changed some aspects of our design plan but I am sure we can come up with something as an alternative. It also adds another 3 RGB 120mm fans to the build for the front panel.


Part 5 of this build log will move to the assembly and fabrication of our new basement shroud, we shared images of that via our Facebook Page and it was really well received. Stick around and see you for the next chapter.

Next Post

Previous Post

© 2021 Mod 83

Theme by Anders Norén